What Are Quilters Blogging About Today?

The Spirited panel was designed by Elise Genest for Northcott Fabrics. The panel measures 24″ x 44″.

I cut my strips 2.75” which yields 4” finished hexies. There were 210 hexies.  I let the design tell me what it needs to tell a good story.  After cutting my strips I had about 2.25” strip left.  This allowed me to cut diamonds and make 11 kaleidoscope Star 60 units. I added 4” finished Hollow Cube 60’s and a 12” hollow Cube with 4” cubes inside it to represent the stables. 

Spirit was left in the corral far too ...

I have been traveling and teaching. I picked up my friend and fellow Studio 180 Design Certified Instructor Barb Wiseman, we left Pennsylvania and went west to Lexington, KY and met up with another fellow Studio 180 Design Certified Instructor Toni Raynolds. Barb and Toni assisted me while teaching One Block Wonder and a Hollow Cube 60 classes at Thomas Sewing Center. What a fabulous time we had! Thank you Toni for taking such good care of Barb & I.

Thank you to Thomas Sewing Center owner Alysson Rife and everyone who attended. I had a great time.

After Thomas Sewing ...

Does anyone remember an old song from the 40’s called “I got the Sun in the Morning “? It was written by Irving Berlin in 1946 for a musical called “Annie Get Your Gun”.

I’ve been humming that tune while working on this great panel designed by the Morris Group for QT Fabrics. The panel measures 36″ x 43″. Bohemian Sunrise will be available in early 2025.

I was at a quilt retreat last weekend with my friends the Turtle Crew. I took off the borders which left me with a width of 28″ for the panel. I cut ...

Check out my unboxing video of new QT Fabrics coming out early 2025.

@QTFabric #Bohemian Sunrise #Autumn Smiles #TuckerTrimmer1 #Star60

If you follow me you know I love my Chihuahua Tucker.

But, These cat panels by Rubin Design Studio, exclusively from eQuilter are just fabulous!

Mysterious Kitty panel measures 43.5″ x 29.5″. I decided to cut my strips 3.25″ yielding 168 – 5″ finished hexies.

I decided to start my design at the top of the panel, choosing the upper right corner to start, and placing 8 hexies across the top before going down to start the left side.

Above is the design I settled on. The edges of the panel range from black to dark blue. I ...

I get asked all the time where am I teaching. Below is my schedule so far:

• 9/17:  North Country Trunk Show, NY
• 10/5: Zoom OBW Trunk Show, Arizona State Guild
• 11/9: Zoom OBW 1, Arizona State Guild
• 11/11-13: Thomas Sewing Center,  Lexington KY, OBW Workshop
• 11/14: 11/17: Fantastic Quilters OBW Trunk Show & Workshop, Fairfield Glade TN
• 12/7: Zoom OBW 2 , Arizona State Guild
• 2025
• 1/10:  Zoom OBW Trunk Show, Quilt Inc., Delmar, NY
• 1/18: 60 degree Log Cabin, Thread Bears Quilt Guild, Oneida NY
• 1/20: Sew Busy, Gloversville, NY, OBW ...

I saw this panel depicting the 4 Seasons of the Ukraine and loved the soft colors. These Ukrainian figures, costumed in traditional dress, collect Easter baskets in spring, dancing in summer and autumn, and keeping warm by candlelight in winter.

Digitally printed, 29″ panel, includes four 14″ x 21″ frames, 4 Seasons of Ukraine by the Rubin Design Studio, designed exclusively for eQuilter.

I prefer one large panel, so I cut apart the four scenes and stitched them together starting with Winter, Spring, Summer and Autumn.

I cut my strips 3.25″ to yield 5″ finished hexies. This panel yielded ...

A BIG Thank You to Amy of Amy’s Quilt Room in Uniontown, PA. I’m just now home from teaching a One Block Wonder (OBW) workshop or as Amy would call “Quiltpalooza”! It was fabulous! I had so much fun. The Hilton Garden Inn at Uniontown PA was the perfect venue. We had a great space and were very well cared by the staff.

This group of ladies did such a great job. They learned all about OBW’s and how to make Hollow Cube 60’s & Star 60 units. We delve into how to design and enhance our ...

Just for fun I thought I would share how the Quilt Ninja came about.

It all started in 2008. I went to the Virginia Consortium of Quilters Celabration at Smith Mountian Lake and participated in an Apron contest and won 1st place.

I covered the apron vest in pockets. I placed a pocket on my back to hold a ruler and placed a rotary cutter in a front pocket.

I would whip out the ruler and rotary cutter at the same time, stating loudly “Quilt Ninja”! It was pretty funny. Needless to say, the Quilt Ninja became my alter ego ...

I wanted to share two OBW workshops/retreats coming up. The first one is in Reliance TN at Quilters Getaway, 898 Childers Creek Road Reliance, TN 37369 – November 11 – 13, 2024. Hosted by Toni Raynolds of Pieced Perfection. Join me for a creative journey in the world of 60 degree kaleidoscopes.

• Identifying and cutting your repeats.
• Aligning repeats including difficult fabrics.
• Choosing a ruler and understanding the difference between pointed & blunt tip rulers.
• Deciding what strip widths to cut
• And of course, cutting all your equilateral triangles.
• Designing with the hexagons,
• Integrating stars & cubes
• Designing around a panel

Make your ...

I’ve been playing among the stars, literally! In August I will be going to Amy’s Quilt Room in Union Town, PA to teach a One Block Wonder (OBW) Workshop. I want to show them how to design aound a panel and how to add hexies/stars of different sizes.

The panel is Salt Water Dreaming by Spirit of the Bush, it measures 41.5″ x 27″. I decided to cut my strips 3.25″ to yield 5″ finished hexies. When you want to add hexies/stars/cubes of different sizes, they must be divisible by the original size ...

I’m playing around with a panel by Spirit of the Bush, Saltwater Dreaming. I want to see how many intricate hexagons I can make. They seem like they would represent tidal pools to me. The large hexagon on the bottom of the panel is 15″ finished. Can you tell what Deb Tucker techniques I used to make it?

@studio180design @debtucker #star60

While I was teaching a OBW workshop at the Strong House Inn in April, I figured out how to put a hexie inside of a hollow cube. I couldn’t wait to get home and start playing.

I had 6 yards of this fabric from the Astral Voyage line by Josephine Wall and 3 Wishes Fabrics. It only had an 8″ repeat, but the design elements were large. I cut my strips 3 3/4″ for 6″ finished hexies. I make my hollow cubes using Deb Tucker’s Hollow Cube 60 Technique Sheet and the Star 60 Tool. I can ...

When I started cutting the hexies from Queen Bee strips, I knew it was going to be a beautiful OBW! The Queen Bee panel is by by QT Fabrics. It measures 36″ x 44″. The Queen Bee line will be in stores June 2024.

I cut my strips for the hexies 3.25″ for 5″ finished hexies. I cut off the borders. The inner border containing flowers measured 3.25″ so I was able to use them for more hexies. I had a total of 106 hexies to design with.

I used QT Fabrics blender line Rapture to create Hollow ...

I fell in love with this panel the first time I saw it. The colors are just fabulous. Resplendent is by QT Fabrics. The panel measured 36″ x 44″. Resplendent will be in stores June 2024.

I removed the borders and saved them to use as a outer border and binding for the finished quilt. I cut my strips 3.25″ for 5″ finished hexies. I had a total of 105 hexies to design with.

I created Star 60 stars and surrounded the peacock with half hexies using QT Fabrics blender line Rapture. The colors Ocean and Amethyst blended beautifully ...

When I saw this panel by Rubin Design Studio “Intricate Illustrated Kitty” of EQuilter, my heart skipped a beat. I just love the colors, the curves and the movement in this panel.

The panel measured 29″ x 43.5″. I could have cut 3.75″ strips for 6″ finished hexies and trimmed the panel to 42″. But, I decided to cut 3.25″ strips for 5″ finished hexies using my Star 60 Ruler. I would need to trim more of the panel, but I felt a smaller strip would make more interesting hexies. There is some stretching with bias ...

I’m having so much fun with this panel from Rubin Design Studio Intricate Illustrated Kitty – Multi – 28″ x 44″ PANEL – DIGITAL.

Stay tuned for colorful updates.

@Equilter #Equilter #Star60 @studio180design

There is still time to join me for a One Block Wonder Retreat at the fabulous Strong House Inn, Vergennes, Vermont! Not only will you be papmered by the great food and staff at the Strong House Inn, but you will learn:

• Identifying and cutting your repeats.
• Aligning repeats including difficult fabrics.
• Choosing a ruler and understanding the difference between pointed & blunt tip rulers.
• Deciding what strip widths to cut.
• And of course, cutting all your equilateral triangles.
• Designing with the hexagons.
• Integrating stars & cubes. What you can make with thr Star 60 Tool.
• Designing around a panel.

Make ...

I wanted to share some of my OBW progress with QT Fabric panels Resplendent and Queen Bee.

QT’s Resplendent panel, measures 36″ by 42″. I decided to cut off the borders. They measured 3.25″ wide. I will save them for the quilt border and for binding. The inside of the panel measured 25 1/4″ wide.

I cut my aligned panels into 7 – 3.25″ strips and 1 – 2″ strip. 

The strips yielded 105 sets of equilateral triangles.

QT’s Queen Bee

QT’s Queen Bee panel measures 36″ x 42″. I decided to cut off the 3 ...

I have partnered with QT Fabrics and I wanted to share with you two panels they sent me that are coming to your local Quilt Shops Summer 2024! I will be making One Block Wonders with them. I will be [posting my progress here.

@QTFabrics #QTFabrics @Studio180design #studio180design